Signal Conditioners

IMO Signal Conditioners perform 3 port isolation as standard and at the same time, convert the signal to suit the application. The range incorporates an isolated transmitter supply that can be used to power any standard two-wire 4-20mA transmitter loop. As such, they accept a wide range of inputs including the following:-

Voltage; Current; Frequency; RTD Temperature Sensors; & Thermocouple signals

Designed for ease of use, IMO Signal Conditioners can be easily configured by the user - Input and Output types can be simply changed, including the range via simple DIP switches, plus all RTD and thermocouple inputs can be fully linearized. The IMO range of Signal Conditioners are very easy to use, with non-interactive zero and span controls, making adjustments quick and painless.

The IMO Slimcon single output unit, as its name suggests, is exceptionally slim at only 7.2mm wide, and the twin output Dualcon gives the user the capability of splitting the signal, allowing for example, simultaneous transmission of isolate 4-20mA to a programmable logic controller and 0-10V to an inverter. The entire range are available in either AC or DC versions. The AC version allows the unit to operate from any power supply from 90 to 264VAC. The DC version operated from 12-32V AC and 12-36V DC.

Slimcon 6 Signal Conditioning

Isolating Signal Converter

• Wide Range of Inputs Available
• Full 3 Port Isolation
• Zero and Span Pots for Output
• Fast Time Response
• High Accuracy, Low cost
• Only 7.2mm Wide
• The unit is powered from 24Vdc nominal
• Accepts a range of inputs including 4- 20mA and voltage signals
• Produces a high level DC output of either voltage or current.
• The Input and Output of the unit can also be reconfigured using the built-in switches together with the zero and span adjustment potentiometers.

Dualcon 2 output Signal Conditioning

• Universal configurable input - user selectable
• 2 configurable Outputs - user selectable
• Full 3-Port Isolation
• Wide range AC or DC Supply
• Isolated Transmitter Supply
• Very High Accuracy, Low Cost
• Only 17.5mm Wide on DIN rail
• Operates at 90 to 264VAC and 18 - 32VAC and 16 - 36VDC
• The input type and range can be user selected using simple DIL switches inside the unit
• All RTD and thermocouple inputs can be fully linearized. Non-interactive zero and span controls make adjustment of the unit, quick and simple
• The ac version operates from any supply from 90 to 264Vac and the dc version operates from 12 - 32VAC and 12 - 36VDC

Isocon Signal Conditioning

• Universal input/output- user selectable
• Full 3-Port Isolation
• Wide range AC or DC Supply
• Isolated Transmitter Supply
• Very High Accuracy, Low Cost
• Only 12.5mm Wide on DIN rail
• The input type and range can be user selected using simple DIL switches inside the unit.
• All RTD and thermocouple inputs can be fully linearized. Non-interactive zero and span controls make adjustment of the unit quick and simple.
• Optional inversion of input signal an optional second analogue output (see Dualcon data sheet) and an optional Relay alarm output.
• The ac version operates from any supply from 90 to 264Vac and the dc version operates from 12 - 32VAC and 12 - 36VDC